The following page is the instructions for the Light My Bricks LEGO Palace Cinema (10232) Lighting Kit.

If you run into any issues, please refer to the online troubleshooting guide.

To ensure a trouble-free installation of your light kit, please read and follow each step carefully. These instructions can be downloaded in PDF format here

Please note: This page lists instructions for the LED light kit only. If you are wishing to purchase the Light My Bricks LEGO Palace Cinema (10232) LED Lighting Kit , please click here to view the product page

Package Contents:

Package contents:

5x White Strip Lights
15x White 30cm Bit Lights
12x Flashing White 30cm Bit Lights
3x 12-Port Expansion boards
1x LEGO Lamp Post With LED Installed
2x 5cm cables
3x 15cm cables
2x 30cm cables
8x Adhesive squares
1x USB Power Cable

LEGO Pieces:

2x 1×6 Plate (any colour)

Wireless Power Connectors:

If you wish to use Light My Bricks Wireless Power Connectors in between floors (sold separately), please scroll to the bottom of the page to view the instructions. You will require the following extra parts (available for purchase through our DIY range)

1x Wireless Power Connector set (2pk)

Important things to note:

Laying cables in between and underneath bricks

Cables can fit in between and underneath LEGO® bricks, plates, and tiles providing they are laid correctly between the LEGO® studs. Do NOT forcefully join LEGO® together around cables; instead ensure they are laying comfortably in between each stud.

CAUTION: Forcing LEGO® to connect over a cable can result in damaging the cable and light.

Connecting cable connectors to Expansion Boards

Take extra care when inserting connectors to ports of Expansion Boards. Connectors can be inserted only one way. With the expansion board facing up, look for the soldered “=” symbol on the left side of the port. The connector side with the wires exposed should be facing toward the soldered “=” symbol as you insert into the port. If a plug won’t fit easily into a port connector, do not force it.

Incorrectly inserting the connector can can result in bent pins inside the port or possible overheating of the expansion board when connected.

Connecting cable connectors to Strip Lights

Take extra care when inserting connectors to ports on the Strip Lights. Connectors can be inserted only one way. With the Strip Light facing up, ensure the side of the connector with the wires exposed is facing down. If a plug won’t fit easily into a port connector, don’t force it. Doing so will damage the plug and the connector.

Connecting Micro Cable connectors to Micro Expansion Board Ports

Take extra care when inserting the micro connectors to micro ports of Micro Expansion Boards. Connecting Micro Bit Lights to Micro Expansion Boards is similar to connecting lights and cables to Strip Lights. With the expansion board facing up, ensure the side of the connector with the wires exposed is facing down. If a plug won’t fit easily into a port connector, do not force it. Use your fingernail to push the plastic part of the connector to the micro port.

Installing Bit Lights under LEGO® bricks and plates.

When installing Bit Lights under LEGO® pieces, ensure they are placed the correct way up (Yellow LED component exposed). You can either place them directly on top of LEGO® studs or in between.

OK, Let’s Begin!

1.)

2.)

3.)

4.)

Note: If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies (with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.

5.)

6.)

7.)

8.)

9.)

10.)

11.)

12.)

Note: If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies (with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.

13.)

14.)

15.)

16.)

17.)

18.)

19.)

20.)

21.)

22.)

23.)

24.)

25.)

26.)

27.)

28.)

29.)

Note: If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies (with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.

30.)

31.)

32.)

If you wish to use Light My Bricks Wireless Power Connectors in between floors (sold separately), please continue to step 32. otherwise, skip to Step 34.

32.)

33.)

34.)

35.)

36.)

37.)

38.)

If you wish to use Light My Bricks Wireless Power Connectors in between floors (sold separately), please continue to step 39. otherwise, skip to Step 41.

39.)

40.)

41.)

42.)

This finally completes installation of the Light My Bricks Palace Cinema 10232 Light Kit.

We thank you for purchasing this product and hope you ENJOY!