Light My Bricks: LEGO TIE Fighter Pilot™ Helmet 75274 Lighting Instructions

 

 

Using components from our DIY Range, create a simple light up solution for your LEGO TIE Fighter Pilot™ Helmet set 75274.

Please note that there is no set specific Lighting Kit for this LEGO set. The lighting components required are listed below and can be purchased from our DIY range.

If you run into any issues, please refer to the online troubleshooting guide.



DIY Components required:

 


1.)

 

 

2.)

 

 

3.) 

Do NOT push the black technic wheel all the way down, leave a slight gap for the Bit Light to shine out.

 

 

4.)

Do NOT push the black technic wheel all the way down, leave a slight gap for the Bit Light to shine out.

 

 

5.)

OR

 

Note: If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies (with the light or expansion board).

To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.

 

 

6.)

 

 

7.)

 

 

8.)

 

 

9.)

 

 

10.)

 

 

11.)

 

Note: If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies (with the light or expansion board).

To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.

 

 

12.)

 

 

13.)

 

 

14.)

 

 

15.)

 

 

16.)